How to avoid the numerical control lathe cutting fluid bubble?
From:Taian Haishu Machinery Co.,Ltd. Updatetime:2016-3-23 10:14:06 Views：
In the use of cutting fluid, sometimes cutting fluid surface will produce a large number of bubbles.Affect the quality and precision of the numerical control lathe machining.Below bubble when processing the cause and the solution for simple
In the use of cutting fluid, sometimes cutting fluid surface will produce a large number of bubbles.Affect the quality and precision of the numerical control lathe machining.Below bubble when processing the cause and the solution for simple analysis:
A, numerical control lathe cutting fluid of the main causes of bubbles
The cutting fluid level is too low.
Cutting fluid velocity is too fast, bubbles have no time to overflow, is piling up, resulting in a large number of bubbles.
Water tank in the design of right Angle is too much, or too straight cutting fluid nozzle Angle.
Second, avoid the numerical control lathe cutting has the bubble method
In a centralized cooling system, pipe grade series, near the cooling box line pressure should be lower.
To ensure that the cutting fluid level too low, timely check the liquid level height, add cutting fluid in a timely manner.
Don't control cutting fluid flow too fast.
Should be paid attention to when designing the sink, sink rectangular not too much.
Should be paid attention to when using cutting fluid cutting fluid nozzle Angle is not straight.
