How do routine maintenance meter CNC lathe
From:Taian Haishu Machinery Co.,Ltd. Updatetime:2016-9-18 9:21:11 Views：
1, wipe the machine exterior, lid and accessories, reached inside and outside clean, no rust, no 'yellow robe'.
2. Check the padded screws, nuts, handle, oil cup.
3, check for loose spindle, collet chuck with spindle taper fit is good, no
1, wipe the machine exterior, lid and accessories, reached inside and outside clean, no rust, no 'yellow robe'.
2. Check the padded screws, nuts, handle, oil cup.
3, check for loose spindle, collet chuck with spindle taper fit is good, no cone margins.
4, check the track surface, removing margins. Washable small carriage, screw, nut, knife and plug the iron, check the small carriage, screw, nut, adjust the iron plug gap.
5, washable tailstock, reached inside and outside clean and free of burrs.
6, cleaning filters, cooling pumps, cooling box, requiring piping, valves and flow without leakage.
7, cleaning the oil line, linoleum, keeping oil flow.
8, check the oil, oil, oil level compliance.
9, the wiper motor and electrical boxes, to clean the inside and outside.
10, check the spacing device and the ground is safe and reliable.
